Guide Purpose:

• This guide IS designed to:
  • Show how to get to Contamination Events
  • Show how to review for Contamination Events
• This guide IS NOT designed to:
  • Show how events are triggered

How to Pull Contamination Container Events

1. Click on the “Events to Review” tab
2. Select the “Service” Button
3. Select Contamination-Commercial from the Use Case dropdown
4. Video populates for events to review
   

How to Review Contamination Container Events

1. Review event for black bag being dumped into the hopper.
   1. If black bags were already in the hopper before the new load is dumped, they do not count towards review for the new event.
   2. If the event does not show the content of the container being dumped, it means that no black bag was detected.
2. This is the telemetry bar which is used in this case to provide the time line of the event.
   1. The Event line in the telemetry bar shows when the trigger for the container to be dumped is initiated.
      1. Please keep in mind that adjustments can be made to how the event is being recorded and an event line might not show up.
   2. This telemetry bar can be adjusted to the desired timeline of the reviewer.
   3. For more information on the telemetry bar, please refer to our guide on Reviewing Safety Events.
3. This is the playback bar which is used to play, rewind, speed up an event, and adjust the volume of the event.
   1. For more information on the description of the Play back bar, please refer to our guide on Reviewing Safety Events.
4. This section shows the decision buttons for reviewers after reviewing the videos.
   1. Action Required / Next: This button is selected when the reviewer observes black bag in the new dump from the container into the hopper.
      1. After selection has been made, a new event will pop up.
   2. No Action / Next: This button is selected when the reviewer observes there is no black bag in the new dump from the container into the hopper.
      1. After selection has been made, a new event will pop up.